MEAM.Design - IPD 501 - P1: Epic
| Your task for this two-week project is to design and print something epically unmanufacturable. There are only a few constraints:
1. The product must be mounted to a 5.5" x 5.5" wooden base (to be provided), into which you will need to engrave your name and any other details that you deem appropriate. 2. The product must be finished beyond the 3-d printed form. 3. The total "cost" for printing your part(s), as defined below must be less than $30 cost = ($5/in^3) * model + ($5/in^3) * support + ($1/hour) * print_time
where model and support are both in cubic inches, and print_time is in hours | |
| Jan 13, 4:30 p.m. | The project begins. |
| Jan 20, 4:30 p.m. (deliverable A) | Send a high-resolution (1400x1050 px) JPG rendering of your object to medesign@seas.upenn.edu. |
| Jan 27, 4:30 p.m. (deliverable B) | Turn in the finished product for public display and critique. |